Pure steam is used for sterilization of tanks, pipeworks and filling machines. The pure steam generator PureSteam produces sterile, pyrogen-free steam that is ideally suited for SIP (Sterilization-in-Place). The system can also be designed for the production of clean steam for direct injection into the product.


For pure steam generation the feed water enters a tubular heat exchanger with an expansion chamber above. In the tubular heat exchanger the pre-treated water is heated and steam is generated. The tubes of the heat exchanger are connected with the expansion chamber that serves as a separating column. For production of pyrogen-free steam the chamber contains a demistor. After entering the expansion chamber, the steam moves further upwards in the column. By gravity and due to the specific column design, unevaporated water droplets fall back into the lower section of the chamber, thus separating from the steam. Since the droplets may contain contaminants like endotoxins, it is vital that they are not carried forward with the steam. As an important quality characteristics, the conductivity of the pure steam condensate can optionally be monitored. If required, the pure steam generator can be enlarged by additional columns to build up a multi effect distillation system. This allows combined generation of pure water and pure steam at the same time.

  • Generation of sterile, pyrogen-free steam
  • Extension to a multi effect distillation system possible
  • Distribution of pure steam for SIP applications on demand
  • Customized modular design with a standard PLC
  • Skid mounted for easy installation and start-up

Typical Technical Data

Capacity50 – 15.000 kg/h
Steam Pressuremax. 7 bar
Steam Temperatureup to 165 °C
Endotoxins< 0,25 EU/ml
Materialaccording to requirements (1.4404, 1.4435/AISI 316L, …)
Heating Mediumsteam, electric heating
Optionsdifferent automation levels; remote maintenance access; water pre-treatment; conductivity measurement in the condensate; combined pure water generation; pure steam distribution (loop)


JMR EUROPE Sp. z o.o.
Sobieskiego 11/204-C
40-084 Katowice

Tel: +48 (32) 352 04 24
Kom: +48 601 424 429
E-mail: jmr@ceti.pl


PC Flyer

FB Flyer