From 2013 Zigler Poland diversified the offer with THE MACHINES FOR PHARMACEUTICAL INDUSTRY and successfully launched several production lines, for such pharmaceutical products as:Syrup in 50 ml glass bottles with atomizers with a capacity of up to 2400 pcs/hDrops in 30 ml glass bottles with screw caps with dropper with a capacity of up to 3000 pcs/hAntibiotics in 150 ml aerosol cans with a capacity of up to 3,600 units/hSea water in aerosol made with BOV technology in cans of 50 ml and 150 ml with a capacity of up to 1800 pcs/hAll lines have been built based on the regulations and requirements of the pharmaceutical industry. Machines have got all the necessary certificates and documentation authorizing the packaging of such products.Standard features of the equipment for the pharmaceutical industry:Implementation…
It is a great pleasure to introduce to you ZIGLER POLAND. Zigler ia a producer of machinery and devices for product filling into the aerosol cans and glass bottles with atomizers. In 2009 diversified their offer to include filling lines. The main goal of Zigler company is to produce machinery of the highest quality. This is enabled by continuous development of the latest technologies and the use of best components. Thus, the ZIGLER brand is getting increasingly acknowledged and recognised by customers all around the world. Their machines operate now in over 18 countries. Highly qualified aerosol engineer team, best structural designers in the sector who have been designing aerosol machines for over 20 years, and a very well developed design department using the cutting-edge software, applying the ISO 9001:2008…
Description ZIGLER offers also fully automatic production lines to create products in glass packaging with atomizers (spray system).Our lines boast productivity of up to 3,600 pcs/h with a capacity of 100 ml.A typical automatic line is configured as follows:Infeed table where operators put empty Pucks packagesDevice blowing through empty bottles (to remove any contamination)Line filling module (number of working heads: 8)Automatic Rotary Module equipped with:- System of inserting atomizers into the bottle- Pre-crimping module- Atomizer crimping deviceAtomizer sorterAtomizer elevatorAutomatic Rotary Module equipped with: - System of embedding decorative rings onto clamped atomizers- System of embedding decorative caps onto bottlesSystem of transportation between working unitsCentral control cabinet with computerZigler company also offers a „special” version of the line made in accordance with the ATEX directive along with valid certificates. Diagram
Advantages Supplied solely with compressed airHigh operational safetyLow operating costsDispensing accuracyPossibility of cycle regulationSmall dimensionsModularity – possibility of implementing additional devices Technical specification Height: 1710 mmWidth: 1230 mmLenght: 1320 mmIndexing wheel diameter: 1100 mmWeight: 300 kgWorking pressure: 6-8 barAir consumption: 12-25 m3/h (depending on equipment and production capacity)Capacity: up 2400 pcs/h Description The MRI 110/16 is a fully automatic device used for production of perfumes with atomizers in glass bottles. The machine operation is fully pneumatic and it is used to fill containers (glass or plastic bottles) with liquid product. Materials of highest quality (stainless and acid resistant steel) are used for the MRI construction, thus allowing working conditions even in a highly hazardous environment. The MRI machine is supplied solely with compressed air which prevents the hazard of explosion…
Description The pneumatic atomizer cutter Z-2007 is a device used for shortening atomizer tubes to a required length in the range between 50 and 250 mm. The edge of the tube cut forms forming a so called “swallow tail” which prevents the tube from aligning with the bottom of the bottle. Technical specification Tube length range: 50 – 250 mm Width: 165 mm Length: 370 mm Height: 250 mm (adjustable range: 25 mm) Weight: ~ 5 kg Required pressure supply: 0,6 ÷ 0,8 MPa (6 ÷ 8 bar) Working pressure: 0,4 ÷ 0,6 MPa (4 ÷ 6 bar) Compressed air quality: According to ISO 8573-1 for 15÷35°C => CLASS IV
Description The semi-automatic crimping machine is used for providing a tight and enduring crimp of atomizers onto glass or plastic bottles. A specially designed strength and crimp regulation system ensures reliable and esthetical clamping of atomizer onto the bottle which is a key factor in these types of products. Technical Data Dimensions: 400 x 400 x 850 / 950 mm Weight: ~ 38 kg Supply / Controls: Pneumatic Container height: 20 ± 250 mm (special design for higher packaging) Atomizer diameter: 13 – 22 mm (exchangeable crimping tongs for each diameter)
Description This semi-automatic machine embeds decorative rings onto bottles with atomizers and its function is to accurately embed rings that mask the atomizer. It is equipped with a proper head to match the shape and size of the ring. The head itself is made in such a way as to prevent damaging rings during the embedding process. Technical Specification Dimensions: 400 x 400 x 850 mm Weight: ~ 25 kg Supply / Controls: Pneumatic Atomizer diameter: 13 - 22 mm - according to the order Ring diameter: according to received samples
Description The semi-automatic filling machine is a device used for filling cans and glass or plastic bottles with liquid product (perfume). We carry two systems of filling devices in our offer:Volume oriented (filling product in an amount compatible with the cylinder dosage setting)Vacuum (filling „up to the level” regardless of the packaging capacity)The filling system is selected depending on your requirements of:Type of product (foaming, thick, etc.)Type of packaging (glass, aluminum, plastic, etc.)Our qualified group of experts will help you with advise on choosing the best system for your specific needs. Technical data Dimensions: 400 x 400 x 850 mm Weight: ~ 20 kg (vacuum version); ~ 40 kg (volume oriented version) Supply / Controls: Pneumatic Containers height: 50 ± 300 mm Standard system of filling: Vacuum („up to the…
